Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Pads on a Honda DIO ZX 2001 AF34 Scooter

Model: Honda Honda Various
Part: Brake pads

Video tutorial

In this tutorial video, see how to replace the brake pads on a Honda DIO ZX 2001 AF34 scooter: first, remove the brake caliper, which is usually held in place by just two bolts; once the caliper is off, unscrew the two pins through which the brake pads slide and then remove them, taking care not to bend the brake hose too much as it could break.

Now take the new pads, which are thicker, and retract the brake piston as shown in the video; use a specific product (Brake cleaner) to clean the brake caliper and the piston.

Once the piston is fully retracted, you can fit the new pads. The pins should be lightly greased with copper grease (do not touch the part that contacts the disc with greasy hands).

Reassemble everything in reverse order.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Honda Dio Scooter
How to Replace the Battery on a Honda Dio Scooter
Honda Honda Various In this video tutorial, see how to replace the battery on a Honda Dio scooter, 50cc, following a few simple steps. First, purchase a new battery (che…
Replacing the Battery on a Honda SH300 Scooter (or Any Other Two-Wheeled Vehicle)
Replacing the Battery on a Honda SH300 Scooter (or Any Other Two-Wheeled Vehicle)
Honda Honda Various Removing the battery on a scooter or motorcycle is exactly the same: first, disconnect the negative terminal, and then the positive. At this point, t…
How to Replace the Brake Pads on the Honda SH
How to Replace the Brake Pads on the Honda SH
Honda Honda Various If you need to replace the brake pads on this scooter model and are unsure how to proceed, you can find the necessary information and steps in the tu…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos