Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Air filter

To replace the engine air filter on a Honda CR-V, follow these simple steps shown in this video. First, open the bonnet using the appropriate lever. The air filter is located to the right of the engine, in the position shown at minute 0:35. To open the cover, you will need to unscrew the five screws holding it in place without removing them. Now loosen the screw on the air tube. Using pliers, loosen the clamps on the tube connecting the filter to the engine. You can now remove the cover. Take out the old filter found inside and replace it with the new one. Now you can reinsert the cover, reattaching the tubes, tightening the five screws loosened earlier, and securing the air tube with the appropriate screw.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Filter on the Honda CR-V L4 2.4L
Replacing the Air Filter on the Honda CR-V L4 2.4L
Honda CR-V (2007-2012 / MK 3) In this video tutorial, you will learn how to remove and replace the engine air filter on the Honda CR-V L4 2.4L third generation in simple steps. Fi…
How to replace the engine air filter of the Honda CR V
How to replace the engine air filter of the Honda CR V
Honda CR-V (2017-2022 / MK 5) In the following guide, we will help you complete the replacement of the engine air filter in your Honda CR V. Before starting the actual procedure, …
How to Replace the Air Filter on a Honda CR-V
How to Replace the Air Filter on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Replacing the air filter on Honda CR-V models produced from 2007 to 2012 is a very simple maintenance task that can be done independently in a few st…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos