Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Honda Accord

Model: Honda Accord MK 7 - Years 2002-2007
Part: Warning light – error code

If you have just completed the regular service on your Honda Accord Mk7 but the warning light continues to illuminate at every start, do not worry as the solution is very simple and within everyone's reach. First, if you haven't already done so, completely turn off the car and locate the button under the fuel gauge. Next, press and hold it while inserting the key to turn on the ignition. Wait for about ten seconds and release the button to complete the reset procedure. Finally, start the engine or turn off the ignition completely.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the 2003 Honda Accord
How to Reset the Maintenance Light on the 2003 Honda Accord
Honda Accord (2002-2007 / MK 7) To manually reset the maintenance light on your 2003 Honda Accord, follow these steps. First, insert the key and turn it to position one to activate …
How to Reset the Service Light on a 2018 Honda Accord
How to Reset the Service Light on a 2018 Honda Accord
Honda Accord (2018-2023 / MK 10) If the service light on your 2018 Honda Accord stays illuminated on the dashboard even after changing the oil and filter, you need to reset it by fol…
How to Reset the Maintenance Light on a 2008 Honda Accord
How to Reset the Maintenance Light on a 2008 Honda Accord
Honda Accord (2012-2017 / MK 9) If you own a 2008 Honda Accord and want to know how to manually reset the maintenance light, follow this simple procedure. First, enter the vehicle a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos