Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the 2003 Honda Accord

Model: Honda Accord MK 7 - Years 2002-2007
Part: Warning light – error code

To manually reset the maintenance light on your 2003 Honda Accord, follow these steps. First, insert the key and turn it to position one to activate the instrument cluster. It is not necessary to start the engine to complete the reset. Once done, press and hold the button located at the bottom right corner of the cluster while simultaneously turning off and back on the dashboard. Finally, wait a few seconds, and as soon as the light goes off, the reset procedure is successfully completed.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Honda Accord
How to Reset the Maintenance Light on the Honda Accord
Honda Accord (2002-2007 / MK 7) If you have just completed the regular service on your Honda Accord Mk7 but the warning light continues to illuminate at every start, do not worry as…
How to Reset the Service Light in a Honda Accord
How to Reset the Service Light in a Honda Accord
Honda Accord (2018-2023 / MK 10) To reset the service light on a Honda Accord 2021, turn on the instrument cluster or the multimedia system without starting the engine and use the ce…
How to Reset the Oil Light on a Honda Accord?
How to Reset the Oil Light on a Honda Accord?
Honda Accord (2002-2007 / MK 7) Looking at the dashboard of the Honda Accord, just to the right of the small central display, you will notice a single button that is used to reset t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos