Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb in a Honda Accord?

Model: Honda Accord MK 8 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: License plate light

See other generations:
Video tutorial

To replace the number plate light bulb in a Honda Accord, lift the tailgate to access the components inside. Here, you will find the connector connected to the bulb, which must be disconnected so that the holder and the bulb can be removed from their housing.

Once the two pieces are removed, pull out the old bulb from the holder, insert the new bulb, and connect it to the connector. Finally, snap it back into its housing from inside the tailgate.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Number Plate from a Honda Accord
How to Remove the Front Number Plate from a Honda Accord
Honda Accord (2008-2013 / MK 8) Before you can start, exit the cabin of your Honda Accord and head to the front of the car. Begin by unscrewing and removing the screws that secure t…
How to Install the Front Number Plate Holder on a Honda Accord
How to Install the Front Number Plate Holder on a Honda Accord
Honda Accord (2018-2023 / MK 10) In today's video, see how to install the front number plate holder on the current series of the Honda Accord. Remember to be careful with the collisi…
How to Replace the Front Headlamp Bulb on a Honda Accord?
How to Replace the Front Headlamp Bulb on a Honda Accord?
Honda Accord (2012-2017 / MK 9) To replace the front headlamp bulb on a Honda Accord, open the bonnet to access the rear of the headlamp corresponding to the bulb to be removed. Dis…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos