Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors on a Honda Civic

Model: Honda Civic MK 7 - Years 2001-2006
Part: Fuel injectors

To replace the injectors on a Honda Civic, open the bonnet to loosen the bolts that secure the plastic cover on top of the engine block. Once this cover has been removed, unscrew the securing screws of the injectors and disconnect the cables attached to them. This will allow you to extract the old injectors from their housing and insert the new ones. These must be properly connected to the cables and secured with the bolts, then cover everything with the corresponding panel.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the injectors in the Honda Civic?
How to replace the injectors in the Honda Civic?
Honda Civic (2006-2012 / MK 8) In this tutorial, we can see how to replace the injectors in the Honda Civic, a simple operation but one that requires good manual dexterity. First o…
How to Remove the Window Winder Handle on a Honda Civic
How to Remove the Window Winder Handle on a Honda Civic
Honda Civic (1995-2001 / MK 6) Before you can start, open the door of your Honda Civic. Begin by inserting a thin but sturdy tool into the gap between the window winder handle and …
Where is the fuse box of the Honda Civic?
Where is the fuse box of the Honda Civic?
Honda Civic (2012-2015 / MK 9) Locating the fuses inside your Honda Civic (2012-2015) is straightforward and with the following guide, you will find them without any difficulty. Fi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos