Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Honda S2000?

Model: Honda S2000 AP2, AP1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Clutch

Video tutorial

To replace the clutch on a Honda S2000, open the bonnet to access the components inside the engine bay. Loosen the bolts securing the gearbox to the rear of the engine. Lift the car and remove the additional fastening screws for the gearbox located at the bottom of the vehicle.

You can then completely remove the gearbox and access the clutch situated between it and the engine. Now, remove the clutch and replace it with a new part.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Clutch Pedal of the Honda S2000?
How to Adjust the Clutch Pedal of the Honda S2000?
Honda S2000 (1998-2009 / AP2, AP1) To adjust the clutch pedal of the Honda S2000, first remove the panel located immediately behind the pedals: this will allow access to all the compon…
What is the Fuse Diagram for the Honda S2000?
What is the Fuse Diagram for the Honda S2000?
Honda S2000 (1998-2009 / AP2, AP1) This video shows the locations of the fuse boxes for the Honda S2000 and their respective diagrams, useful if you need to check the fuses for a malfu…
How to Replace the Gear Knob on a Honda S2000
How to Replace the Gear Knob on a Honda S2000
Honda S2000 (1998-2009 / AP2, AP1) In this very short video guide today, see the step-by-step operation to replace the gear knob on a Honda S2000. This operation is very simple to do a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos