Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the Honda S2000?

Model: Honda S2000 AP1, AP2 - Years 1998-2009
Part: Fuse box

This video shows the locations of the fuse boxes for the Honda S2000 and their respective diagrams, useful if you need to check the fuses for a malfunctioning device. The first box is located inside the cabin, specifically in the lower left area of the dashboard on the driver's side. Both the second and third boxes are located in the engine compartment, one on the driver's side and the other on the passenger side. Ensure you replace any blown fuses with spares of equivalent specifications and always work with the vehicle turned off.

Posted on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Clutch Pedal of the Honda S2000?
How to Adjust the Clutch Pedal of the Honda S2000?
Honda S2000 (1998-2009 / AP1, AP2) To adjust the clutch pedal of the Honda S2000, first remove the panel located immediately behind the pedals: this will allow access to all the compon…
How to Replace the Clutch on a Honda S2000?
How to Replace the Clutch on a Honda S2000?
Honda S2000 (1998-2009 / AP1, AP2) To replace the clutch on a Honda S2000, open the bonnet to access the components inside the engine bay. Loosen the bolts securing the gearbox to the …
How to Replace the Gear Knob on a Honda S2000
How to Replace the Gear Knob on a Honda S2000
Honda S2000 (1998-2009 / AP1, AP2) In this very short video guide today, see the step-by-step operation to replace the gear knob on a Honda S2000. This operation is very simple to do a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos