Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Honda Jazz

Model: Honda Jazz MK 2 - Years 2008-2013
Part: Service warning light

To reset the service light on the Honda Jazz, start by turning on the ignition, press the "reset" button until the dashboard display shows the wrench symbol with an arrow pointing to a car, then hold the "reset" button until a symbol with rotating arrows appears. Press the "i" button to go to the top message, hold the "reset" button until the display shows the number "360". If you do not see the number 360 with this procedure, try releasing the "reset" button for a few seconds and then pressing it again immediately after (as shown in the video).

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Honda Jazz?
How to Reset the Service Light on the Honda Jazz?
Honda Jazz (2013-2019 / MK 3) .. In this tutorial, we will see how to reset the service light on the Honda Jazz, a very simple and quick operation to be performed only.. …
How to Reset the Service in a Honda Jazz?
How to Reset the Service in a Honda Jazz?
Honda Jazz (2008-2013 / MK 2) This tutorial explains how to reset the service in a Honda Jazz, a very simple and quick operation that should only be performed after completing all…
How to Reset the Service on a Honda Jazz?
How to Reset the Service on a Honda Jazz?
Honda Jazz (2008-2013 / MK 2) In this tutorial, you will see how to reset the service on a Honda Jazz, a very simple and quick operation. Before doing this, ensure that you have c…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos