Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Honda Pilot?

Model: Honda Pilot YF4, YF3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, see how to reset the engine oil service light on a Honda Pilot. Before performing this simple operation, ensure you have completed all required maintenance work.

Start by inserting the key and turning on the ignition; it is not necessary to start the engine. Then, repeatedly press the indicated button located to the right of the tachometer until you reach the oil life screen.

At this point, hold down the same button until the display starts to flash, then release it, press it a second and a third time, the latter for about 5 seconds.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Honda Pilot?
How to Reset the Service Light on a Honda Pilot?
Honda Pilot (2016-2023 / YF6, YF5) In this tutorial, you will learn how to reset the service light on a Honda Pilot. This operation is extremely simple and quick, and should only be pe…
How to Reset the Engine Oil Change Light on a Honda Pilot
How to Reset the Engine Oil Change Light on a Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) In just a few minutes, we will see how to reset the maintenance service light for the engine oil change on a Honda Pilot. First, get in the vehicle a…
How to Reset the Engine Oil Light on the Honda Pilot
How to Reset the Engine Oil Light on the Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) Below are the instructions needed to reset the maintenance light for the engine oil change on the Honda Pilot. First, get inside the vehicle and star…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos