Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Honda Jazz

Model: Honda Jazz MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Key

See other generations:
Video tutorial

Below, you will discover how to correctly perform one of the simplest maintenance tasks, which is replacing the battery in your Honda Jazz Mk2 key. First, unscrew the small screw located at the top of the cover using a standard cross-head screwdriver.

After that, remove both the rear cover and the battery holder located just underneath.

Open the battery holder to access the exhausted battery and replace it with a new one. Finally, reassemble the cover correctly, and the procedure is complete.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Honda Jazz?
How to Replace the Remote Battery on a Honda Jazz?
Honda Jazz (2013-2019 / MK 3) To replace the remote battery on a Honda Jazz, loosen the screw located at the base of the device, on the side opposite to the key. Once unscrewed, t…
How to Replace the Key Battery of a Honda Jazz
How to Replace the Key Battery of a Honda Jazz
Honda Jazz (2013-2019 / MK 3) When the key for the 2017 Honda Jazz stops working, the causes may be that the key is not being read or the remote battery is flat. If the cause is t…
How to Replace the Remote Battery of the Honda Jazz
How to Replace the Remote Battery of the Honda Jazz
Honda Jazz (2001-2008 / MK 1) If the remote for your first-generation Honda Jazz (2001-2008) has suddenly stopped working due to a dead battery, don't worry as you can easily repl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos