Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of a Honda Jazz

Model: Honda Jazz MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

When the key for the 2017 Honda Jazz stops working, the causes may be that the key is not being read or the remote battery is flat. If the cause is the battery, you need to replace it. Start by pressing the button located at the back of the remote and then open the top part of the casing to extract the emergency key. After removing the key, insert it into the left side of the remote to lever it open.

Open the remote and replace the non-working key with a new one. Close the remote and test the key's functionality by approaching the vehicle.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Honda Jazz
How to Replace the Key Battery on a Honda Jazz
Honda Jazz (2008-2013 / MK 2) Below, you will discover how to correctly perform one of the simplest maintenance tasks, which is replacing the battery in your Honda Jazz Mk2 key. F…
How to Replace the Remote Battery on a Honda Jazz?
How to Replace the Remote Battery on a Honda Jazz?
Honda Jazz (2013-2019 / MK 3) To replace the remote battery on a Honda Jazz, loosen the screw located at the base of the device, on the side opposite to the key. Once unscrewed, t…
How to Replace the Cabin Filter of the Honda Jazz 2
How to Replace the Cabin Filter of the Honda Jazz 2
Honda Jazz (2008-2013 / MK 2) If you own a second-generation Honda Jazz (year 2008-2013) and want to learn how to replace the cabin air filter, simply follow these instructions an…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos