Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Coolant Replacement on Honda Hornet

Model: Honda Honda Various
Part: Antifreeze coolant

Video tutorial

To proceed with the antifreeze repair on this motorcycle model, find the information and instructions in this description, and you can also refer to the video. First, remove the seat and side panels.

Next, lift the tank to access the radiator cap. Below the radiator, there is the coolant drain plug; place a container to collect the fluid and proceed to unscrew the plug. Wait for the fluid to completely drain out. Then, disconnect the expansion tank hose.

Next, re-screw the drain plug and refill the system with coolant.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Top Up the Coolant on the Honda SH 150
How to Top Up the Coolant on the Honda SH 150
Honda Honda Various To check and verify the fluid levels on your scooter, follow the instructions below and refer to the video. To check the coolant level, first open th…
How to Replace the Key Battery on a Honda Vehicle
How to Replace the Key Battery on a Honda Vehicle
Honda Honda Various Replacing the battery in a Honda vehicle remote is the same for all other vehicles produced by the manufacturer. This operation is very simple to per…
Replacing Front Bulb on Honda Silver Wing
Replacing Front Bulb on Honda Silver Wing
Honda Honda Various If you want to know how to replace the front headlight bulb on a Honda Silver Wing, not only will we tell you, but we have good news! To do this, you…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos