Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on Honda CR-V

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the pollen filter in the Honda CR-V. First, purchase a new cabin filter. Next, get inside the vehicle, switch off the engine, pull the handbrake, and open the glove compartment.

Remove any items inside the glove compartment, then use a flathead screwdriver to remove the pins located inside the glove box (both right and left). Lower the glove compartment completely to access the cabin filter cover.

Press the clips on the cover to remove it from its position. Once the cover is off, you can take out the cabin filter.

Clean the housing thoroughly and position the new cabin filter, following the arrow indications according to the airflow direction.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on Honda CR-V?
How to Replace the Cabin Filter on Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the cabin filter on the Honda CR-V, open the glove compartment from the passenger side and press sideways so that it can be fully extracte…
How to Replace the Cabin Filter in the Honda CR-V?
How to Replace the Cabin Filter in the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) Replacing the cabin air filter in the Honda CR-V is a very simple and quick task. Start by opening the glove compartment and unhooking the two inner …
How to Replace the Cabin Filter in the Honda CR-V?
How to Replace the Cabin Filter in the Honda CR-V?
Honda CR-V (2017-2022 / MK 5) In the Honda CR-V, replacing the cabin air filter is very simple; this tutorial shows how to proceed. In this model, the filter is located behind the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos