Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs in the Honda Civic 1.7 CDTI?

Model: Honda Civic MK 7 - Years 2001-2006
Part: Glow plugs

In this tutorial, you will see how to replace the glow plugs in the Honda Civic 1.7 CDTI, a very simple operation. For this, you will need a long 12mm socket. First, warm the engine slightly, then open the bonnet and remove the upper cover by undoing the 4 bolts. Next, locate the glow plugs situated behind the injectors, disconnect their respective connectors, and clean any residue in their vicinity. Once done, undo the first glow plug, remove it, and fit the replacement, avoiding over-tightening. Repeat the process for the remaining 3 glow plugs.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Glow Plugs on a Honda Civic 2003
Replacing Glow Plugs on a Honda Civic 2003
Honda Civic (2001-2006 / MK 7) Is your car having starting issues? Let's remove the glow plugs from the Civic. Lift the front bonnet and secure it. Remove the engine cover panel fr…
How to Reset the TPMS Warning and Calibrate the Pressure on the Honda Civic
How to Reset the TPMS Warning and Calibrate the Pressure on the Honda Civic
Honda Civic (2016-2021 / MK 10) On the Honda Civic, resetting the Tyre Pressure Monitoring System (TPMS) is done with the vehicle stationary, with pressures adjusted to the values i…
How to replace the headlight bulb of the Honda Civic
How to replace the headlight bulb of the Honda Civic
Honda Civic (2016-2021 / MK 10) If you want to completely replace the front headlight bulb of your Honda Civic by yourself, then the following guide is all you need. First of all, g…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos