Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Honda Amaze

Model: Honda Amaze MK 2 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

See other generations:
Video tutorial

If you have found that a headlight bulb is burned out, the following text will outline the steps to correctly perform the replacement. First, open the hood and reach behind the headlight where the bulb needs to be replaced.

Remove the upper cover and disconnect the power connector. Then, remove the bulb by first unhooking the steel clip and replace it with the new one, being careful not to touch the bulb with your fingers.

Reattach the retaining clip, reconnect the power connector, and close the cover.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb of the Honda Amaze
How to Replace the Headlight Bulb of the Honda Amaze
Honda Amaze (2018-2025 / MK 2) To replace the headlight bulb of the Honda Amaze, open the hood to access the internal components of the engine bay. Specifically, disconnect the con…
How to Replace the Cabin Light Bulb on a Honda Amaze
How to Replace the Cabin Light Bulb on a Honda Amaze
Honda Amaze (2013-2020 / MK 1) If you need to replace the cabin light bulb, you will find the necessary information in the description below and in the video. First, access the cab…
How to Replace the Key Battery of the Honda Amaze
How to Replace the Key Battery of the Honda Amaze
Honda Amaze (2013-2020 / MK 1) Replacing the key battery of your Honda Amaze (Mk1) brings the key back to life at a very low cost and in just a few seconds. Let's discover the vari…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos