Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Honda Accord?

Model: Honda Accord MK 8 - Years 2008-2013
Part: Service warning light

To reset the Service light on a Honda Accord, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is lit, press and hold the button located on the right side of the dashboard. After a few seconds, you will notice the Service light and the corresponding maintenance interval start to flash. When they become steady, you can release the button, noting that the Service light has been reset; at the end of the operation, you can switch off the dashboard.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2018 Honda Accord
How to Reset the Service Light on a 2018 Honda Accord
Honda Accord (2018-2023 / MK 10) If the service light on your 2018 Honda Accord stays illuminated on the dashboard even after changing the oil and filter, you need to reset it by fol…
How to Reset the Oil Service Light on the Honda Accord?
How to Reset the Oil Service Light on the Honda Accord?
Honda Accord (2012-2017 / MK 9) To reset the Oil Service light on the Honda Accord, insert the ignition key and turn it to the 'on' position without starting the engine. This allows…
How to Reset the Service Light on a Honda Accord
How to Reset the Service Light on a Honda Accord
Honda Accord (1998-2002 / MK 6) To reset the service light related to the service on a Honda Accord vehicle produced from 1998 to 2002, insert the key into the ignition switch and s…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos