Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb

Model: Honda CR-V MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Light bulb

See other generations:
Video tutorial

Open the engine bay bonnet and locate the position of the burnt headlamp bulb. Disconnect the electrical wires, remove the seal, and the spring that holds the bulb in place.

Take the new bulb and position it in its housing. To secure it, engage it with the spring (lift the spring lever, place the bulb in position, and release the lever).

Refit the seal and reconnect the power wires. Close the bonnet and check the headlamp operation.

The vehicle on which this maintenance operation is performed is a Honda CR-V.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Honda CR-V?
How to replace the headlight bulb of the Honda CR-V?
Honda CR-V (2017-2022 / MK 5) To replace the headlight bulb of the Honda CR-V, open the bonnet to access the rear of the headlight. Here, you will find the connector attached to t…
Replacement of Front Headlamp Bulb
Replacement of Front Headlamp Bulb
Honda CR-V (2002-2007 / MK 2) This video shows the replacement of the front headlamp bulb in a Honda CR-V. After obtaining the correct replacement part, disconnect the electrical …
How to Replace the Front Headlamp Bulb on a Honda CR-V?
How to Replace the Front Headlamp Bulb on a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the front headlamp bulb on a Honda CR-V, open the bonnet to access the components inside the engine bay: inside the headlamp, there will b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos