Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of the Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

In this video tutorial, you will see how to disassemble and replace the front headlight of the Honda CR-V, following the instructions provided below. First, open the bonnet and start unscrewing the screws located on the top and bottom of the front bumper to detach and remove it; then you can unscrew all the other screws securing the front headlight, disconnecting the electrical connector of the bulbs to remove it, as shown in the video.

At this point, replace the headlight unit with the new one, making the electrical connection, and finally reassemble the front bumper!


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on the Honda CR-V?
How to Replace the Rear Light Bulb on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the rear light bulb on the Honda CR-V, open the tailgate of the boot and remove the protective caps of the screws located between the seal…
How to replace the front headlamp on a Honda CR-V
How to replace the front headlamp on a Honda CR-V
Honda CR-V (2002-2007 / MK 2) In this tutorial, see how to replace the front headlamp on a second-generation Honda CR-V, produced from 2002 to 2007. To remove the old headlamp, fi…
How to replace the headlight bulb of the Honda CR-V?
How to replace the headlight bulb of the Honda CR-V?
Honda CR-V (2017-2022 / MK 5) To replace the headlight bulb of the Honda CR-V, open the bonnet to access the rear of the headlight. Here, you will find the connector attached to t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos