Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the float in the Honda Civic?

Model: Honda Civic MK 8 - Years 2006-2012
Part: Fuel pump

In this tutorial, you can see how to replace the float in the Honda Civic, a very simple operation that requires replacing the entire pump, as the two elements are directly connected. First, disconnect the battery, then open the boot and remove the rear seats. Next, remove the cross cover, open the large metal cap, and disconnect both the fuel lines and the power connector. At this point, simply unscrew the outer ring, extract the pump, insert the replacement in the correct orientation, and reassemble everything.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Civic (2001-2006 / MK 7) Before starting, open the front door of your Ford Fiesta. Begin by prising out and removing the inserts from the door panel. Next, unscrew and remove…
Honda Civic (2016-2021 / MK 10) Replacing the front headlight bulb on your 2017 Honda Civic takes just a few minutes. By following the steps in this guide, you will have no difficul…
Honda Civic (2016-2021 / MK 10) Start by pressing the rear button of the key for your Honda Civic to extract the physical emergency key. Next, using the emergency key as a lever, pr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos