Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a Honda Accord?

Model: Honda Accord MK 9 - Years 2012-2017
Part: Blower motor

In this tutorial, you will see how to replace the cabin fan in a Honda Accord, a very simple and quick operation. First, ensure that the key is not inserted, then open the passenger door and position yourself under the dashboard. Next, remove the plastic cover by pulling it outwards, disconnect the power connector, and unscrew the indicated screws using an 8 mm socket spanner. At this point, you can extract the fan from its housing, insert the replacement, and reassemble everything by following the reverse procedure.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radiator Fan on a Honda Accord
How to Replace the Radiator Fan on a Honda Accord
Honda Accord (2002-2007 / MK 7) Before you start, open the bonnet of your Honda Accord. Begin by disconnecting the hoses connected to the radiator fan, then unplug the electrical co…
How to replace the cabin fan in the Honda Accord?
How to replace the cabin fan in the Honda Accord?
Honda Accord (2002-2007 / MK 7) In this tutorial, we can see how to replace the cabin fan in the Honda Accord, an extremely simple and quick operation. First of all, make sure that …
How to Replace the Heating Resistor in the Honda Accord?
How to Replace the Heating Resistor in the Honda Accord?
Honda Accord (2008-2013 / MK 8) In this tutorial, you will see how to replace the heating resistor in the Honda Accord, a very simple and quick operation. First, ensure that the key…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos