Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of a Honda CR-V

Model: Honda CR-V MK 5 - Years 2017-2022
Part: Door trim panel

Today's guide will show you how to remove and replace the front door panel of a Honda CR-V. First, open the front door and start by prying off the plastic cover of the grab handle to remove it. Then, unscrew the fastening screws located underneath, as shown in the video. At this point, pry at the sides of the panel to detach and remove it, disconnecting the handle cable and the electric connector for the window switch. Finally, refit the door panel by reversing the disassembly procedure!

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Honda CR-V
Disassembly of the front door panel of the Honda CR-V
Honda CR-V (2017-2022 / MK 5) Today we will discover the instructions that will allow us to disassemble and remove the front door panel of the Honda CR-V. First of all, we open th…
How to Remove the Right Front Door Panel on Honda CR-V
How to Remove the Right Front Door Panel on Honda CR-V
Honda CR-V (1995-2001 / MK 1) Remove the right front door panel on the Honda CR-V. Using a screwdriver, undo the screws located in the space of the upper door handle and the screw…
Removing the Door Panel on Honda CR-V
Removing the Door Panel on Honda CR-V
Honda CR-V (2007-2012 / MK 3) Is the left door panel of a Honda CR-V due for replacement? Here’s how to remove it. Unscrew the screws located in the space of the upper door releas…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos