Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery for the Honda Civic

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Key

See other generations:
Video tutorial

This short and simple guide will show you how to disassemble and replace the battery in the key fob for the Honda Civic. First, take your key fob and unscrew the small screw, then separate the plastic casing; next, remove the circuit board and access the battery compartment, as shown in the video.

At this point, remove and replace the battery with a new one of the correct type and the same specification; insert it the right way round and reassemble the key fob, finally checking the functionality of all buttons!


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Replacing the Key Battery of the Honda Civic
Replacing the Key Battery of the Honda Civic
Honda Civic (2012-2015 / MK 9) Below is the procedure to remove and replace the battery of the Honda Civic key remote. First, take your key and start by unscrewing the small screw …
How to replace the remote battery on a Honda Civic?
How to replace the remote battery on a Honda Civic?
Honda Civic (2012-2015 / MK 9) To replace the remote battery on a Honda Civic, extract the key from the top of the device to leverage it open. This will allow you to access the int…
How to replace the remote control battery in a Honda Civic?
How to replace the remote control battery in a Honda Civic?
Honda Civic (2006-2012 / MK 8) In this video, you will see how to replace the remote control battery in a Honda Civic. For this simple operation, you will need a small cross-head s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos