Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Honda
  4. :
  5. Civic
  6. : How to open the trunk hatch locked in the Honda Civic?

Honda Civic - Video tutorial

Model: Honda Civic MK 10 - Years 2016-2021
Part: Checks and maintenance
Operation: How to open the trunk hatch locked in the Honda Civic?

In the Honda Civic, it may happen that the trunk door gets stuck, for example due to a problem with the control button or the lock actuator. In these cases, we can perform an emergency opening following the simple procedure shown in this tutorial. First, we open the rear doors, then we lower the backrest of the sofa by operating the corresponding lever. Next, we go inside the trunk compartment, remove the indicated cap, and, using a flat-tipped screwdriver, unlock the mechanism. The trunk door will now be free to open.


Posted on 24 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Civic 2012-2015 - What is the purpose of the PGM-FI light in the Honda Civic? Read Answer
    • Civic 2012-2015 - What does the PGM FI light indicate on the Honda Civic? Read Answer
    • Civic 2006-2012 - What does the Honda Civic tire pressure warning light mean? Read Answer
    • Civic 2012-2015 - How to troubleshoot the Honda Civic VSA system? Read Answer
    • Civic 2016-2021 - What to do if the maintenance light on the Honda Civic comes on? Read Answer
    • Civic 2012-2015 - Where are the Honda Civic service codes located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos