Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Husaberg FE 350?

Model: Husaberg Fe 350
Part: Fuel pump

Video tutorial

To replace the fuel pump on a Husaberg FE 350, loosen the screws that secure the seat to its housing and the screws located on the front side panels of the bike: by removing these parts, you will also be able to unscrew the screws and disconnect the hoses that secure the tank to the front of the bike.

Underneath it, you will find the fuel pump, which needs to be freed from its securing screws and replaced with a new spare part: after replacement, you can reassemble the tank, side panels, and seat.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Husaberg FE 350
Fe 350 This guide shows how to perform routine maintenance by changing the engine oil and oil filter on the Husaberg FE 350 enduro bike. First, unscrew the …
Removing Chain and Sprocket on Husaberg FE 350
Removing Chain and Sprocket on Husaberg FE 350
Fe 350 In this video tutorial, we will see the instructions for removing the chain and sprocket from a Husaberg FE 350, following these steps. First, remove…
How to Remove the Rear Shock Absorber from the Husaberg FE 350?
How to Remove the Rear Shock Absorber from the Husaberg FE 350?
Fe 350 To remove the rear shock absorber from the Husaberg FE 350, use a socket spanner to loosen the bolt located on the right side of the bike. This bolt …

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos