Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil and reset the indicator light on a Hyundai Tucson car

Model: Hyundai Tucson NX4, MK 4 - Years: 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

As we know, when the oil light or service light comes on, we must first solve the issue and then reset the light. Today we will give you an example of a 2022 Hyundai Tucson in which we need to replace the engine oil and then reset the light.

We remove the plastic covers on the underside of the car, then remove the oil drain plug using a 17 mm wrench. As the oil drains into a container, we remove the oil filter using an 8 mm wrench.

We tighten the plug on the oil drain and replace the oil filter. We reassemble the previously removed parts and top up the oil in the tank; this type of car will require about 2.5 liters.


Posted on 17 December 2024 by ScegliAuto


Related tutorials

How do you reset the service light in the Hyundai Tucson?
How do you reset the service light in the Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) The reset of the service light of the Hyundai Tucson can be done using only the commands that the car is equipped with, no other external tools, comp…
How to Change the Engine Oil on the Hyundai Tucson
How to Change the Engine Oil on the Hyundai Tucson
Hyundai Tucson (2022-2026 / NX4, MK 4) The steps to replace the engine oil on the Hyundai Tucson are simple and quick to perform independently. To carry out the oil change, first, unscrew …
How to Reset the Tyre Pressure on a Hyundai Tucson?
How to Reset the Tyre Pressure on a Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) In this video, see the Delphy BOT answering the question of how to reset the tyre pressure on a Hyundai Tucson: If the tyre pressure is significantly…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos