Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Hyundai I40

Model: Hyundai I40 MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the front headlight of the Hyundai I40. First, we open the hood of the car and start to disassemble and remove the front bumper, unscrewing all the fixing screws located above the bumper and on both sides of the front fenders; once the bumper is removed, it will be possible to remove the headlight assembly, unscrewing the screws and disconnecting the electrical connector of the bulbs, as shown in the video.

At this point, if necessary, we replace only the lights or directly the front headlight, fixing it correctly!


Posted on 13 January 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Hyundai i40
How to Replace the Rear Light Bulb on a Hyundai i40
Hyundai I40 (2011-2019 / MK 1) The steps to replace the rear light bulb on a Hyundai i40 are straightforward and can be done independently. The first step is to open the boot. The …
How to Replace the Heating Radiator on a Hyundai i40
How to Replace the Heating Radiator on a Hyundai i40
Hyundai I40 (2011-2019 / MK 1) Today, we will discover the instructions that allow us to remove and replace the heating radiator of the Hyundai i40's cabin. First, get inside the v…
Where is the OBD port of the Hyundai I40 located?
Where is the OBD port of the Hyundai I40 located?
Hyundai I40 (2011-2019 / MK 1) If you are planning to use the OBD port of your Hyundai I40 but do not know where it is located, do not worry because in the following guide you will…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos