Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating resistor in the Hyundai Accent?

Model: Hyundai Accent MK 2, MC - Years 2005-2009
Part: Checks and maintenance

In this tutorial we can see how to replace the heating resistor in the Hyundai Accent, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely, then go to the passenger side and position yourself under the dashboard. Next, locate the resistor in question, disconnect the power connector and unscrew the two fixing screws with a cross-tip screwdriver. At this point, all that's left is to remove the old resistor, insert the replacement, and reassemble everything.

Posted on 17 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to dismantle the dashboard of the Hyundai Accent
How to dismantle the dashboard of the Hyundai Accent
Hyundai Accent (2017-2024 / YC, HC, MK 5) Today's main instructions will show us the process of disassembling the dashboard and its components of the Hyundai Accent. First, we get into the ca…
How to disassemble the dashboard of the Hyundai Accent
How to disassemble the dashboard of the Hyundai Accent
Hyundai Accent (2010-2017 / RB, MK 4, RC) The main steps outlined in this guide will show us how to disassemble and remove the entire dashboard of the Hyundai Accent. First, we get into the c…
How to replace the rear headlight bulb of the Hyundai Accent 4
How to replace the rear headlight bulb of the Hyundai Accent 4
Hyundai Accent (2010-2017 / RB, MK 4, RC) Replacing one of the rear bulbs of your Hyundai Accent Mk4 is really simple and thanks to the procedure described in the following guide, you will be…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos