Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Kona
    4. : Replace the air filter on Hyundai Kona

Hyundai Kona - Video tutorial

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Air filter
Operation: Replace the air filter on Hyundai Kona

Let's see how to remove and replace the engine air filter on a new Hyundai Kona. We open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same with the rod. We locate the aeration container; unhook the plastic hooks of the air box, uncover the cap of the container and extract the worn air filter. We insert a new filter in the dedicated housing (making it adhere well around the walls). Finally we reassemble the cap of the air box and tighten with the hooks. We close the front hood after maintenance.


Posted on 5 November 2023 by ScegliAuto

This video is currently unavailable


How to replace the air filter on Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) In order to replace the Hyundai Kona air filter, you need to open the hood so that you can have access to the components inside the engine compartmen
Hyundai Kona cabin filter removal
Hyundai Kona (2017-2023 / MK 1) Removing the Hyundai Kona cabin air filter? To remove the filter, the glove box located in the dashboard must be removed. We open the glove compartme
Replacing the cabin air filter on Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) To get to the passenger compartment air filter, or pollen filter, you must remove the glove compartment obviously located on the front passenger side

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos