Do it yourself
Frequently asked questions about cars and motorcycles

How to change the battery of the Hyundai Tucson remote control.

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

To replace the battery in the Hyundai Tucson remote control, work on a clean surface and use a small plastic tool or a thin flathead screwdriver, gently prying it open to avoid scratching the casing. First, remove the emergency mechanical key from the remote, then locate the opening slot of the shell and separate the two halves without forcing them: the goal is to disengage the latches without breaking the clips.

Once opened, access the battery compartment and remove the button battery, paying attention to the polarity (how the “+” and “-” are positioned). Insert the new battery of the same type and close the remote by properly aligning the two parts until you hear the latches click into place.

Reinsert the mechanical key and check the proper functioning of the open/close buttons and, if present, the trunk. If the buttons feel stiff or unresponsive after the replacement, reopen and check that the battery is properly seated in the contacts and that the shell is completely closed.


Posted on 27 August 2026 by ScegliAuto


Related tutorials

Hyundai Tucson (2004-2009 / JM, MK 1) How do you change the battery in the key of a Hyundai Tucson? Let's see how to disassemble the remote and replace the battery inside. Take your remot…
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the key fob battery in the Hyundai Tucson, take the fob and locate the button to press to extract the emergency mechanical key. Remove it …
Hyundai Tucson (2022-2026 / NX4, MK 4) These brief and simple instructions will show you how to disassemble and replace the battery in the Hyundai Tucson remote key. First, take the remote…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos