Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Hyundai Tucson remote control

Model: Hyundai Tucson NX4, MK 4 - Years 2022-2026
Part: Key

These short and simple instructions will show us how to disassemble and replace the battery of the Hyundai Tucson key remote. First, we take our remote and start by removing the physical key from inside it; then we use the slot created to open the back cover, thus accessing the battery and electronic board, as shown in the video. At this point, we remove and replace the battery with a new one, of the correct type and with the same code; we reassemble the remote and insert the key, finally verifying the operation of the commands!

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on the Hyundai Tucson
How to Replace the Key Fob Battery on the Hyundai Tucson
Hyundai Tucson (2010-2015 / LM, MK 2) Here’s a guide on how to disassemble and replace the battery in the key fob for the Hyundai Tucson in simple steps. First, take the key fob and use a…
How to Replace the Remote Battery on a Hyundai Tucson
How to Replace the Remote Battery on a Hyundai Tucson
Hyundai Tucson (2022-2026 / NX4, MK 4) To replace the battery located inside the remote of your latest Hyundai Tucson, you only need a flathead screwdriver and a new CR2450 battery. First,…
How to Replace the Remote Battery on a Hyundai Tucson?
How to Replace the Remote Battery on a Hyundai Tucson?
Hyundai Tucson (2022-2026 / NX4, MK 4) When the remote for your car, regardless of the model, including the Hyundai Tucson mentioned here, stops working, such as unlocking doors, it likely…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos