Do it yourself
Frequently asked questions about cars and motorcycles

How to change the battery of the Hyundai Tucson key.

Model: Hyundai Tucson NX4, MK 4 - Years: 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

On the Hyundai Tucson, the remote control battery is replaced by working on a clean surface to avoid losing springs or small pieces. Keep a plastic lever or a small flat tool handy and prepare the new battery by choosing one that is identical to the old one, checking the printed code and the orientation for installation.

Unlock and remove the emergency mechanical key from the remote, then locate the opening notch of the shell. Insert the lever into the notch and apply gradual pressure along the seam until the two halves separate, avoiding sharp twists to prevent marking the plastic or breaking the clips.

Once opened, locate the button battery and gently remove it, noting the position of the positive side and the orientation. Insert the new battery in the same direction, ensuring it is seated properly in the contacts.

Close the remote by aligning the edges correctly and press until the clips snap into place, then reinsert the mechanical key. Finally, check that the buttons respond correctly.


Posted on 6 January 2026 by ScegliAuto


Related tutorials

Hyundai Tucson (2015-2021 / MK 3, TL) To be able to replace the battery inside the key of your third-generation Hyundai Tucson by yourself, just follow the procedure described in this new…
Hyundai Tucson (2015-2021 / MK 3, TL) Replacing the battery inside your Hyundai Tucson key is fortunately one of the simplest DIY maintenance tasks. Follow the instructions in this guide,…
Hyundai Tucson (2015-2021 / MK 3, TL) Before you can start, you need to release and remove the physical key from the electronic key of your Hyundai Tucson by simply pressing the relevant …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos