|
Do it yourself
| |||
| ||||
How to change the car radio of the Hyundai IX35
Model: Hyundai ix35
MK 1
- Years 2009-2015
In today's article, we will show you how to replace the car radio in a Hyundai IX35. For this operation, you will need a special tool for plastic parts, or alternatively, a flathead screwdriver, but be careful not to damage the plastic. You will also need a Phillips screwdriver.
To replace the car radio, the first step is to remove the upper plastic cover by prying it off with the special tool or screwdriver, lifting it, and removing it. Once the upper cover is removed, you will need to take out the lower button panel by prying along the edge to extract it. Be cautious, as there are connectors located at the back of the button panel. Once the button panel is removed, you will need to disconnect the connectors. At this point, you will have access to the four screws that secure the car radio. Unscrew them and remove the car radio, being careful with the rear connectors. Once it is extracted, disconnect the connectors. Now, depending on whether the car radio is original or an Android radio, follow the instructions provided on the sheet to install the new car radio by connecting the connectors to the radio and then securing it with the screws. Finally, reinsert the cover and the button panel, reconnecting their connectors.
Posted on 8 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Hyundai ix35
(2009-2015 /
MK 1)
Before you begin, sit in the driver's seat of your Hyundai IX35. Start by prying off and removing the upper cover of the radio using a thin but sturd…
Hyundai ix35
(2009-2015 /
MK 1)
In this video tutorial, you will see the procedure to dismantle and replace the original car radio with an Android one in the Hyundai Ix35. First, di…
Hyundai ix35
(2009-2015 /
MK 1)
Removing the car radio in a Hyundai IX35 is a very simple and quick operation; let's see how to proceed in this tutorial. First, ensure the key is no…
Other guides you may be interested in |
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.273
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |