|
Do it yourself
| |||
| ||||
How to Set the Tyre Pressure on a Hyundai I20
Model: Hyundai I20
GB, IB, MK 2
- Years 2014-2021
Watch the video on how to reset the tyre pressure on a Hyundai I20, but it's important to note: the monitoring system on this vehicle can be of two types: indirect TPMS, which uses ABS sensors to calculate pressure based on the rotation speed of the wheels and does not measure the actual pressure of each tyre; and direct TPMS with a pressure sensor inside each tyre. The procedure described in the video refers to the indirect system. Check and adjust the tyre pressure based on the sticker located on the driver's door pillar; do not inflate beyond the indicated pressure, as this can be dangerous. Turn on the ignition and locate the reset button, usually found in the glove compartment or at the bottom of the dashboard (depending on the version). Press and hold the button for 3 to 5 seconds, during which the warning light will flash three times and then turn off; you will then need to drive for a few minutes to recalibrate the values on the control unit.
Posted on 16 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Hyundai I20
(2014-2021 /
GB, IB, MK 2)
The TPMS light of the 2018 Hyundai I20 must be reset after the tire pressure has been adjusted. To reset the TPMS light, we must: - start the car; - …
Hyundai I20
(2020-2026 /
BC3, MK 3)
If the tire pressure warning light appears on the instrument panel of the Hyundai I20, it means that at least one of the four tires has insufficient …
Hyundai I20
(2020-2026 /
BC3, MK 3)
If the low tyre pressure light is displayed on the Hyundai i20 dashboard, it means that at least one of the four tyres is at insufficient inflation p…
Other guides you may be interested in
|
Where is the Spare Wheel in the Peugeot 5008?
This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.190
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |