Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Hyundai I40

Model: Hyundai I40 MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

Video tutorial

This guide explains how to replace the timing belt on the Hyundai I40. To carry out the replacement, you must remove the right wheel and the wheel arch liner to access the engine where the timing belt is located. Remove the crankshaft pulley with a torque of 170-180 Nm. Loosen the belt tensioner to remove the old belt.

Position the new belt by mounting the crankshaft sprocket and aligning the camshaft. Adjust the tension of the tensioner according to the manufacturer's specifications and manually rotate the crankshaft for two complete turns.

Refit the components.


Posted on 23 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Hyundai i40
How to Reset the Service Light on a Hyundai i40
Hyundai I40 (2011-2019 / MK 1) Before resetting the service light on a Hyundai i40, perform the car service, which includes changing the oil and oil filter, replacing the air filte…
How do you reset the Service light in the Hyundai I40?
How do you reset the Service light in the Hyundai I40?
Hyundai I40 (2011-2019 / MK 1) Thanks to the video tutorial attached here, we will be able to independently reset the Service light of the Hyundai I40. By Service we mean everythin…
Where is the OBD port of the Hyundai I40 located?
Where is the OBD port of the Hyundai I40 located?
Hyundai I40 (2011-2019 / MK 1) If you are planning to use the OBD port of your Hyundai I40 but do not know where it is located, do not worry because in the following guide you will…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos