|
Do it yourself
| |||
| ||||
What to Do If the Windscreen Washer Fluid Doesn't Spray
Model: Hyundai Genesis
BH
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
Let’s see how to fix the issue of the windscreen washer not spraying. Ensure the car engine is off. It may seem trivial, but first, check that there is washer fluid in the reservoir! If it’s empty, fill it with the appropriate fluid, never with tap water, as it clogs the channels and damages the windscreen. Check the fuse that protects the washer; it may be blown. Ask a friend to activate the washer while you are near the bonnet; you should hear a buzzing sound from the washer fluid reservoir area. If you hear the buzz but no water comes out, there may be a blockage or a disconnected or kinked hose; otherwise, the pump may be faulty. To clean the injectors and hoses, disconnect the pump near the washer fluid reservoir, check the filter upstream of the pump, clean it, and also clean the injectors on the bonnet with a very fine pin. Follow the hose route to check for any breaks or kinks.
Posted on 3 June 2026 by ScegliAuto
Related tutorials
Hyundai Genesis
(2008-2016 /
BH)
All you need to replace the button battery inside your Hyundai Genesis key is a simple flathead screwdriver. Let's see how to do it. First, use the s…
Hyundai Genesis
(2008-2016 /
BH)
If it's time to replace the air filter on your Hyundai Genesis but you don't know how, don't worry because this guide provides all the useful informa…
Hyundai Genesis
(2008-2016 /
BH)
If you intend to replace the battery in the remote key, follow the steps outlined below. First, remove the emergency key and use a screwdriver to pry…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |