Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Pressure Sensors on a Hyundai Kona

Model: Hyundai Kona MK 1 - Years 2017-2023
Part:

The procedure involves resetting the monitoring system after checking and correcting the tyre pressures. First, check the pressure of all tyres, turn on the ignition, and locate the reset button under the steering wheel; press and hold it for about 3 to 5 seconds to activate the learning mode. Now, you need to take a short drive (10 to 15 minutes) to complete the reset. It is necessary to maintain a constant speed above 31 mph. This allows the sensors to resynchronise with the system; at the end, the warning light should turn off.

Posted on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Kona (2017-2023 / MK 1) Setting the time and date on a Hyundai Kona vehicle is a simple and quick operation that can be done independently, thanks to our video tutorial that…
Hyundai Kona (2017-2023 / MK 1) Hello, this guide aims to reset the "Service" light on your Hyundai Kona. Start the vehicle's instrument panel by pressing the ignition button. Using…
Hyundai Kona (2017-2023 / MK 1) How to replace the number plate light fitted on a Hyundai Kona? Open the boot lid, remove the light that contains the bulb (located inside the tailga…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos