Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Diesel Filter on a Hyundai i30 Diesel MK1

Model: Hyundai I30 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Diesel fuel filter

See other generations:
Video tutorial

The diesel filter on the Hyundai i30 is located in the engine bay on the upper right side, on the passenger side in left-hand drive vehicles. It is a cylindrical component with pipes and electrical connectors attached.

You will need some rags as the filter will leak diesel when removed. To access the filter, you must remove the air filter box by taking off the 4 securing clips, disconnecting the mass airflow sensor, unscrewing the locking ring of the side air duct, and removing the cover and air filter; unscrew the support of the intake duct and then remove it. Now you can disconnect the 3 electrical connectors on the filter (water sensor and heater); remove the safety rings from the flexible pipes, place rags under the pipes to catch any spills, and using a 12mm socket, unscrew the upper nuts of the locking ring.

Remove the electrical sleeve from the sensor, take off the last securing nut, and extract the filter. Clean the filter housing with brake cleaner and a cloth, lubricate the gasket with a bit of oil, replace the cartridge, screw it in until it makes contact, re-screw the water presence sensor, reattach the safety rings, reconnect the electrical connectors, and prime the pump to activate the circuit and bleed the air. Reattach the intake duct and reconnect the mass airflow sensor.

Start the engine and let it idle for a few minutes to check for leaks.


Posted on 19 November 2026 by ScegliAuto


Related tutorials

Hyundai I30 (2016-2024 / PD, MK 3) This tutorial shows you how to replace the diesel filter on a Hyundai i30, third generation model with a 1.6 CRDi engine. First, remove the airbox ho…
Hyundai I30 (2011-2016 / GD, MK 2) The correct term is "manual fuel pump" and it is a black rubber bulb located on the fuel filter, which has two main functions: to bleed air from the …
Hyundai I30 (2016-2024 / PD, MK 3) Replacing the engine air filter in your latest Hyundai i30 is very simple, and by following the steps in this guide, you can complete the task in jus…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Replacing the Glow Plugs on the Fiat Ducato 2.3 Multijet

Today, we will go through the main instructions to remove and replace the glow plugs on the Fiat Ducato 2.3 Multijet. First, open the bonnet of the vehicle and begin by removing the front bumper; to access the glow plugs, it will also be necessary to remove the cooling radiator and the intercooler by unscrewing the bracket bolts and disconnecting the various pipes. Now disconnect the connectors from the glow plugs and use a socket wrench with an extension to unscrew and remove them, replacing them with new original ones.

Watch the video!


by ScegliAuto

More videos