Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Matrix
    4. : Removing the starter motor on Hyundai Matrix

Hyundai Matrix - Video tutorial

Model: Hyundai Matrix MK 1 - Years 2001-2010
Part: Starter motor
Operation: Removing the starter motor on Hyundai Matrix

Is the starter motor taste good? Let's see how it disassembles from the vehicle. We open and lift the front hood, disconnect the terminals of the power supply to the battery. We detach the starter motor clamps with pliers or screwdriver depending on the pressure, unscrew the locking pins of the starter motor with a socket wrench and remove it from the engine compartment. We assemble the new ignition motor with the connection of the power supply cables and with the attached tightening screws. We connect the power supply terminals and close the front hood.


Posted on 8 December 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos