Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

First, remove the inner cover of the opening handle and unscrew the underlying screws. Another screw is located inside the handle of the panel, protected by a cap that must be removed to access the screw.

Similarly, proceed to unscrew the screw present on the edge of the panel. At this point, using a plastic lever, remove the plastic triangle located at the back of the window and disengage the pressure clips along the edges of the panel; to complete the removal, disconnect the opening lever cable and the connector for the window lift controls.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Dismantling the Rear Door Panel
Dismantling the Rear Door Panel
Hyundai Sonata (2004-2014 / ) Dismantling the rear door panel is very simple as it is secured with only three screws and pressure clips along the edges; start by removing the inne…
Instructions for Removing the Door Panel
Instructions for Removing the Door Panel
Hyundai Sonata (2004-2014 / ) If you need to remove the door panel, it is advisable to first equip yourself with plastic levers and a small screwdriver with a curved, pointed tip …
Removing Front Door Panel
Removing Front Door Panel
Hyundai Sonata (2004-2014 / ) First, remove the protective caps covering some fastening screws: one is located inside the internal opening lever and the other inside the handle gr…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos