Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : Removing the rear door panel

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata - Years 2004-2014
Part: Door panel
Operation: Removing the rear door panel

The removal of the rear door panel is very simple to carry out as it is fixed with only three screws and pressure fasteners along the edges; start by removing the inner lining of the opening handle seat to access the screw below; in the same way remove the cap inside the seat of the handle in the center of the panel and the one along the outer edge near the lock; then unscrew these three screws, remove the triangular-shaped plastic covering at the rear of the window seat and unhook the pressure locks on the edge of the panel; move it away from the door and disconnect the glass lifter control socket and the lock cable to complete the removal.


Posted on 24 August 2023 by ScegliAuto



Removing the rear door panel
Hyundai Sonata (2004-2014 / ) First remove the inner lining of the opening handle and unscrew the screws underneath. Another screw is located inside the panel handle, protected by
Door panel removal instructions
Hyundai Sonata (2004-2014 / ) If the door panel needs to be disassembled, it is suggested first of all to equip yourself with plastic levers and a small screwdriver with a curved
Replacement of the exterior rearview mirror
Hyundai Sonata (2004-2014 / ) The exterior rear-view mirror is mounted in such a way as to allow the driver adequate rear and side visibility of the car, without turning his head

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos