Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Suspension on Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Shocks

See other generations:
Video tutorial

Let's look at removing the shock absorbers on a Hyundai Tucson. Lift the car and remove the wheel to access the shock absorber.

Use a socket wrench to unscrew the mounting bolts of the shock absorber at the wheel hub (disconnect the brake line with a screwdriver): unscrew the bolts on the side. Unscrew the mounting screws of the shock absorber from inside the engine compartment.

Slide the shock absorber out of its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Install the new shock absorber on the vehicle in reverse order.

Refit the wheel after the shock absorber installation.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Replacement of the front door lock of the Hyundai Tucson.
Replacement of the front door lock of the Hyundai Tucson.
Hyundai Tucson (2015-2021 / MK 3, TL) Today we will go through the steps to disassemble and replace the front door lock of the Hyundai Tucson. First, let's open the front door of the vehi…
How to replace the front headlight bulb of the 2018 Hyundai Tucson
How to replace the front headlight bulb of the 2018 Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) If you want to find out how to replace the headlight bulb of your third-generation Hyundai Tucson (2018), just read the following guide and follow al…
Replacing the Front Headlamp Bulb on the Hyundai Tucson
Replacing the Front Headlamp Bulb on the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) Through these steps, you will see how to remove and replace the front headlamp bulb on the Hyundai Tucson. First, open the bonnet of the vehicle and …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos