Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Silent Blocks on Hyundai Getz

Model: Hyundai Getz MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

Video tutorial

Today we will see the main steps to remove and replace the silent blocks (which help minimise vibrations and noise) on a Hyundai Getz. First, lift the vehicle and remove the front wheel; using a 19 mm spanner, unscrew the bolt of the wishbone, separating the brake assembly from it. At this point, remove the wishbone by unscrewing the bolt to access the silent block inside; remove it with a press or a suitable puller and replace it with the new one, as shown in the video.

Now reassemble everything!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
Guide to Replacing the Timing Belt on a Hyundai Getz 1.1
Guide to Replacing the Timing Belt on a Hyundai Getz 1.1
Hyundai Getz (2002-2011 / MK 1) In this guide, you will find instructions for removing and replacing the timing belt on a Hyundai Getz 1.1. First, open the engine bonnet and start b…
Replacing the Antenna and Its Base on the Hyundai Getz
Replacing the Antenna and Its Base on the Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) These brief and simple steps will show you the procedure for removing and replacing the radio antenna and its base on the Hyundai Getz. First, get in…

    Frequently Asked Questions

    • Getz 2002-2011 - Where is the oxygen sensor located in a Hyundai Getz? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos