Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Hyundai Atos

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Spark plugs

Before you can start, open the front bonnet of your Hyundai Atos. Begin by removing the air filter housing by unscrewing the securing bolts and disconnecting the relevant electrical connectors. This will give you access to the spark plug leads. Proceed by disconnecting these leads by simply pulling them off, and you will reach the spark plugs. At this point, unscrew and remove the spark plugs, and you will have completed the disassembly. To fit the new spark plugs, simply reverse this procedure, and the replacement will be complete.

Updated on 7 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Engine Oil and Oil Filter Replacement on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Hyundai Atos. First, lift the vehicle and remove the drain b…
How to Change the Engine Oil of a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Before you begin, remove the oil dipstick, then put the car in first gear and engage the handbrake on your Hyundai Atos. Finally, lift the vehicle. S…
Where is the fuse box of the Hyundai Atos located?
Where is the fuse box of the Hyundai Atos located?
Hyundai Atos (1997-2008 / MK 1) To locate the fuse box of your first-generation Hyundai Atos, simply follow the procedure described in our new guide. First, reach the driver's seat …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos