Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : How to replace the gaiter and gear knob on Hyundai I30 MK1

Hyundai I30 - Video tutorial

Model: Hyundai I30 FD, MK 1 - Years 2007-2012
Part: Gearshift gaiter
Operation: How to replace the gaiter and gear knob on Hyundai I30 MK1

Today we will see the steps that will allow us to disassemble and replace the headset and the gear knob on a Hyundai I30 first series, in simple and quick steps. First we get on board the car and start by unhooking and removing the gearshift gaiter upwards, as shown in the video; then we unscrew the gear knob to extract the knob together with the headset, thus removing both. At this point we replace the new cap with the new one, inserting it before the knob; we just have to screw the knob and attach the gearshift boot again!


Posted on 10 February 2024 by ScegliAuto



Replacement gaiter and gear knob on Hyundai I30
Hyundai I30 (2011-2016 / MK 2, GD) Lift the gearshift gaiter from the lower support by simply pulling it with your hands, then unscrew the knob (there is a lot to unscrew) until it is
How to disassemble the central tunnel in the Hyundai I30?
Hyundai I30 (2007-2012 / FD, MK 1) As we can see in this tutorial, removing the central tunnel in a Hyundai I30 is an extremely simple and fast operation. First of all we grab the base
How do you replace the gear knob of the Hyundai I30?
Hyundai I30 (2016-2023 / PD, MK 3) To replace the shift knob of the Hyundai I30, you need to grab the shift boot so that you can pull the knob upwards and detach it completely. Once th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos