Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bumper on Hyundai Getz

Model: Hyundai Getz MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Front bumper

Video tutorial

Today, you will learn how to replace the front bumper on a Hyundai Getz. Lift the bonnet and unscrew the upper bolts of the bumper, which are 10 mm, as initially shown in the video. Remove the upper part from its clips, then unscrew the 8 mm bolts located in the two wheel arches.

Finally, remove the plastic clips underneath the bumper and you're done. It's very simple! As you can see, this is an operation within everyone's reach, even for less experienced mechanics.

For reassembly, simply proceed in reverse, placing the bumper in position and tightening all the various bolts.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
How to Replace the Front Headlights on a Hyundai Getz
How to Replace the Front Headlights on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) In today's tutorial video, you will learn how to remove and replace the front headlights on a Hyundai Getz by following the instructions below. First…
Guide to Replacing the Timing Belt on a Hyundai Getz 1.1
Guide to Replacing the Timing Belt on a Hyundai Getz 1.1
Hyundai Getz (2002-2011 / MK 1) In this guide, you will find instructions for removing and replacing the timing belt on a Hyundai Getz 1.1. First, open the engine bonnet and start b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos