Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : How to disassemble and replace the clock of a Hyundai Accent?

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 2, MC - Years 2005-2009
Part: Checks and maintenance
Operation: How to disassemble and replace the clock of a Hyundai Accent?

To remove and replace the clock of your Hyundai Accent, in case of malfunction or breakdown, you will have to carefully watch this short illustrative video and repeat the same steps shown. So, first of all, you will have to disassemble and extract the steering wheel, under which you will find the springs of your watch. After having disassembled and removed the housing as well, it will be necessary to disconnect the watch and remove it by eliminating the support clip. Once this is done, it will be possible to insert the new piece and reassemble everything simply by repeating the same steps of the disassembly but in reverse.


Posted on 24 February 2024 by ScegliAuto



How to set the time of the Hyundai Accent
Hyundai Accent (2010-2017 / MK 4, RB, RC) To be able to manually set the correct time in your 2012 Hyundai Accent, just read the following instructions carefully and then put them into practi
How to dismantle the rear light of the Hyundai Accent.
Hyundai Accent (2005-2009 / MK 2, MC) Let's briefly see in this guide the instructions on how to disassemble and replace the rear taillight, thus replacing its bulbs, of the Hyundai Accen
How to disassemble the rear seats in the Hyundai Accent?
Hyundai Accent (2005-2009 / MK 2, MC) As we can see in this tutorial, removing the rear seats in your Hyundai Accent is a very simple and fast operation. First of all, let's go to the rea

    Frequently Asked Questions

    • Accent 2005-2009 - What does the Hyundai Accent tire pressure warning light mean? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos