Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Hyundai Kona?

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Service warning light

After performing the scheduled maintenance, you need to manually reset the service light on the Hyundai Kona to allow for the correct counting for the next service. As shown in the video, this is a very simple procedure. Turn on the ignition by pressing the start button twice, then press the "menu" button located on the right side of the steering wheel until you navigate to the "settings" section. Use the down arrow button to scroll to "service interval", press the "ok" button, scroll down to "reset" and press "ok" again to confirm the reset.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2019 Hyundai Kona
How to reset the service light on the 2019 Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) The reset of the service light on a 2019 Hyundai Kona vehicle is performed after the maintenance operations are carried out at the workshop. The cost…
How to Reset the Service Light on a 2021 Hyundai Kona
How to Reset the Service Light on a 2021 Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) To manually reset the service light on your new 2021 Hyundai Kona, follow these simple steps. First, enter the cabin and ensure all doors are properl…
How to reset the service light on the Hyundai Kona
How to reset the service light on the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Following these short and simple steps, we will see how to reset the service light for the regular maintenance of the engine oil change in the Hyunda…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos