Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Climate Control Bulb

Model: Hyundai Accent LC, MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: A/C controls

See other generations:
Video tutorial

This video shows you how to replace the bulb for the climate control switches. First, locate the screws to be removed, which are found in the cup holder in a slightly hidden position; once unscrewed, the rest of the trim is held in place by clips, so be careful not to damage the plastics and apply gentle pressure with a flat screwdriver.

Once the trim is removed, you will find the wire with the bulb to be replaced just below the stereo, slightly to the left. Take great care during the replacement as it is in an awkward position, so it is advisable to use needle-nose pliers for easier replacement.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Replace the Climate Control Bulbs on the Hyundai Accent
How to Replace the Climate Control Bulbs on the Hyundai Accent
Hyundai Accent (1999-2005 / LC, MK 1) Below are the instructions needed to remove and replace the climate control bulbs on the Hyundai Accent. First, get inside the vehicle and start by r…
How to Reset the TPMS on the Hyundai Accent
How to Reset the TPMS on the Hyundai Accent
Hyundai Accent (2010-2017 / RB, RC, MK 4) The TPMS (Tyre Pressure Monitoring System) is a system that monitors tyre pressure using sensors. If the pressure of any tyre drops below a set value…
How to Remove the Dashboard of the Hyundai Accent
How to Remove the Dashboard of the Hyundai Accent
Hyundai Accent (2010-2017 / RB, RC, MK 4) The main steps in this guide will show you how to remove the entire dashboard of the Hyundai Accent. First, get into the cabin and start removing all…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos