Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Door Panel on a Hyundai i20

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021
Part: Door trim panel

This video tutorial explains how to remove the door panel on a Hyundai i20, model produced from 2014 to 2021. First, remove the screws securing the panel; there are only two, one covered by a plastic cap near the handle and the other inside the armrest. Once the screws are removed, use a trim tool or flat screwdriver (preferably a plastic trim tool to avoid damaging the panel) to insert between the panel and the door. Leverage around the perimeter of the panel and pull it away from the door, finally disconnect the three connectors that link it to the rest of the vehicle.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Door Panel on Hyundai i20
Remove the Door Panel on Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) Learn how to remove the rear door panel from the Hyundai i20. Remove the plastic screw cover in the area of the door opening lever, then unscrew the …
Removing Door Panel on Hyundai i20
Removing Door Panel on Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) Remove the door panel if you need to work inside or if it is broken. Let's see how to remove it on a Hyundai i20. Remove the plastic under the window…
How to Replace the Window Switch Panel on a Hyundai i20
How to Replace the Window Switch Panel on a Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) This brief and simple guide shows how to remove and replace the window switch panel on a Hyundai i20, following the instructions below. First, open t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos